Semiconductor Manufacturing Communication Solution
For high-value, high-density fabs and cleanrooms: interference-resistant wireless intercom, personnel/equipment locating and emergency dispatch in one private network.
3 common semiconductor comms problems
- 01
Cleanroom signal attenuation:Metal partitions and dense equipment cause uneven coverage; cross-area calls drop.
- 02
Hard personnel locating & safety:Large clean/restricted/power areas; real-time headcount unknown; slow emergency evacuation.
- 03
Fragmented systems:Radio, locating and emergency broadcast are separate; low coordination and traceability in incidents.
KINGTONE fab solution
High power penetrates metal partitions; unified plant channel planning.
Fiber to workshops/yellow-light areas; low power, scalable, NMS-managed.
LTE/5G private network for personnel locating, video backhaul and data.
Radio + locating + GIS on one map; one-click emergency broadcast.
Typical project parameters
| Parameter | Reference value |
|---|---|
| Coverage | Cleanroom + yellow-light area + power area |
| Network | DMR + LTE/5G private network |
| Terminals | 200–1500 units |
| Locating accuracy | Bluetooth/UWB sub-meter (by deployment) |
Figures above are reference values from comparable projects; final configuration is subject to on-site survey and the contracted technical agreement.
Case brief
A 12-inch wafer fab (reference scenario) deployed RS3500 digital repeaters + CV410 all-optical network + KT-B broadband private network + S300 dispatch: full DMR coverage of cleanroom and power area, real-time personnel locating and one-map emergency evacuation; intrinsic-safe terminals selected per spec in explosion/ESD-controlled zones.